Welcome: Lead Bearing Co.,Ltd.
leadbearingca852@gmail.com +86 15965629650

16279001 Slewing Ring Bearing Turntable Bearing for Large Excavators

Part Number 16279001
Maximum Allowable Gear Tooth Load (Fz) 94870lbs | 423.527KN
Moment Load Rating (Crm) 9075400ft-lbs | 40515.179KN
Bearing Types Slewing Ring Bearing

16279001 Slewing Ring Bearing Turntable Bearing for Large Excavators

The DT Series consists of the eight-point ball bearing Kaydon originally developed to provide maximum load capacity for given envelope and bolt circle diameters. It provides up to 80% increase in capacity over that of a single-row four-point design of the same diameter and bolt circles. Yet the DT Series has a smaller profile than a three-row roller design. 

Design Features 

The internal configuration consists of two deep groove gothic arch raceways, each with a maximum ball complement, located in both the inner and outer rings. This results in a total of eight surfaces where the balls may contact at any time, providing exceptional moment, thrust, and radial load capacities. Through precise manufacturing, the raceways are closely matched to provide a high degree of load sharing. Integral seals are provided to assist in the exclusion of contaminants. 

Availability 

DT Series bearings are made to order with a fully customizable hole pattern for bearing retention, and an internal or external gear or other drive mechanism. 

Applications 

DT Series bearings have been used successfully in heavy duty applications including: 

❚ Large excavators ❚ Large cranes ❚ Mining equipment ❚ Wind turbines ❚ Telescopes

DT NO GEAR.pngdt internal gear.pngdt external gear.png


Specification

Specifications

Part Number

16279001

Maximum Allowable Gear Tooth Load (Fz)

94870lbs | 423.527KN

Moment Load Rating (Crm)

9075400ft-lbs | 40515.179KN

Bearing Types

Slewing Ring Bearing

Outline Dimensions and Weight

Outside Diameter of Outer Ring (Do)

109.375" | 2778.13mm

Inside Diameter of Inner Ring (di)

87.17" | 2214.12mm

Height of overall bearing assembly(H)

9.312" | 236.52mm

Height of outer ring(Ho)

8.937" | 227mm

Height of inner ring(Hi)

8" | 203.2mm

External diameter on outer ring(Dr)

-

Internal diameter on inner ring(dr)

87.17" | 2214.12mm

Approximate Weight (lbs)

7100lbs | 3220.489KG

Mounting Holes

Bolt Circle in Outer Ring (Lo)

102.953" | 2615.01mm

Number Holes in Outer Ring (no)

66

Size of hole in outer ring(Bo)

1.593"

Bolt circle in inner ring(Li)

93.504" | 2375mm

Number Holes in Inner Ring (ni)

66

Size of hole in inner ring(Bi)

1.593"

Gear Data

Pressure Angle of Gear Teeth (α)

20 º

Tooth form

FD

Pitch Diameter of Gear (D2)

87.874" | 2232mm

Gear module(M)

18

Number of Gear Teeth(z2)

124

("+" / "-" sign increases tooth thickness at D2(X2)

-0.5

Face Width of Gear Teeth(b2)

6

gear

Internal